C-6 Receiving and Installation
MedTrack Rehabilitation Treadmills User Guide
.
Installing the hood
15. Set the speed range for the treadmill using the following
steps.
a. Enter the service mode by simultaneously pressing
Stop Belt
,
Slower
, and
Faster
.
b. Choose the appropriate configuration number from
the following:
c. Hold down
Stop Belt
and press the
+
or
-
key until the
correct configuration number appears in the center
display.
Caution!
The configuration must be set to CP1 or CP3. Do not
attempt to use any other configuration.
d. Press
Select
to store the configuration.
e. Exit the service mode by simultaneously pressing
Stop Belt, Slower,
and
Faster
.
16. Test all operational functions, including speed, grade,
timer, and parameters using the following section.
Speed Range
Configuration Setting
0.6 to 7.2 MPH
CP1
1.0 to 12.0 MPH
CP3
2
2
3
1
1. Back of hood
2. Holes for screws
3. Tab for hood cover
1. Back of hood
2. Holes for screws
3. Tab for hood cover
A
B
C
C
B
B
C
A. Hood cover
B. Phillips #8 screws
C. Holes for mounting
hood cover
A. Hood cover
B. Phillips #8 screws
C. Holes for mounting
hood cover
