Quincy QTS Series, Инструкция по эксплуатации

Страница: 15 / 26

Industrial Series Quincy Compressor
50263-106, October 2004 14 3501 Wisman Lane, Quincy IL - 62305-3116
Check the belt alignment by placing a straight-
edge against the face of the flywheel, touching its rim
at two places
(refer to Fig. 14) . Adjust the flywheel or
motor pulley so that the belt runs parallel to the
straightedge. Use a wheel puller to move the motor
pulley on the shaft.
Properly adjusted, a 3 pound pressure applied to
the belt between the motor pulley and the compres-
sor flywheel will deflect the belt about 1/4”(6mm.).
Refer to Fig. 15. To adjust the belt tension, loosen the
4 motor mounting screws and slide the motor in the
proper direction. Retighten the motor mounting
screws.
3 lbs. of pressure will deflect
belt about 1/4" (6 mm.)
Pix 1161
Fig. 15 Typical Belt Adjustment