Quincy QTS Series Скачать руководство пользователя страница 2

Industrial Series

Quincy Compressor

50263-106, October 2004

1

3501 Wisman Lane, Quincy IL - 62305-3116

TABLE OF CONTENTS

SAFETY ................................................................... 1
DESCRIPTION & APPLICATION ............................ 2
INSTALLATION ....................................................... 2
SYSTEM COMPONENTS ........................................ 9
PRE-STARTING CHECKLIST ............................... 11
STARTING & STOPPING THE COMPRESSOR ... 11
MAINTENANCE ..................................................... 12
PILOT VALVE ADJUSTMENTS ............................ 15
DECAL LOCATIONS ............................................. 16
TROUBLESHOOTING ........................................... 18

SAFETY

“DANGER!”, “WARNING!”

, and 

“CAUTION!”

  are

displayed in large bold capital letters to call attention
to areas of vital concern. They represent different
degrees of hazard seriousness, as stated by the fol-
lowing:

DANGER !

Immediate hazards which will result in severe per-
sonal injury or death.

WARNING !

Hazards or unsafe practices that could result in
personal injury or death.

CAUTION !

Hazards or unsafe practices which could result in
minor personal injury, product or property damage.

WARRANTY

Quincy Compressor Reciprocating Products

QTS Air Master Single Stage Compressors

What does this warranty cover?

Quincy Compressor (the Company) warrants this compressor to be free from defects in materials and workmanship for a period of one
year from date of purchase. Vacuum pumps used in natural gas applications are warranted for a 90 day service period.

What are the Company's obligations under this warranty?

In the event this compressor proves to be defective during the warranty period, the Company will, at its sole option, either repair or replace
this compressor.  The Company and its authorized agents may use, at their discretion, reconditioned units when undertaking such repairs
or replacement.  Repaired or replacement units shall be warranted hereunder for the remainder of the warranty period applicable to the
original compressor, or ninety (90) days, whichever is greater.

How do you get service?

Contact your local Quincy distributor, or call the Company's Service department at (217) 222-7700, for directions to the nearest authorized
warranty repair center.  In order for you to be eligible to utilize this warranty, Company must have received a completed warranty
registration card within thirty (30) days of your purchase of this compressor or, at the time service is requested, you must be prepared
to provide proof of purchase in the form of a receipt or invoice.  All moving, shipping and insurance charges incurred by you to deliver
this compressor to the nearest authorized warranty repair center shall be paid by you and shall be your exclusive responsibility.  All risk
of loss or damage to your compressor in transit shall remain with you until such time as Company or its authorized agents take receipt
of your compressor.

What does this warranty not cover?

This warranty is contigent upon proper use of the compressor by purchaser and does not cover:

(A) Abnormal conditions, accident, neglect, misuse or improper storage of the unit.

(B) Deviation from operating or maintenance instructions.

(C) Modifications not authorized by the Company.

(D) Repairs or maintenance (other than routine air tank draining and air filter changes required by your operating and maintenance

manual) made by persons other than Company or its authorized agents.

What are the limits of Company's Liability?

The warranty given herein, together with any implied warranties covering this compressor, including warranties of merchantability or
fitness for a particular purpose are limited in duration to one year from the date of purchase, and no warranties, whether express or
implied will apply after this period.  Some states and provinces do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you.

If this compressor is not in good working order as warranted above, your sole remedy shall be repair or replacement as provided above.

In no event will Company be liable to you for any damages, including any lost profits, lost savings or other incidental or consequential
damages arising out of the use or inability to use such compressor, even if Company or your place of purchase has been advised of the
possibility of such damages.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

Содержание QTS Series



























Отзывы: