Quincy Compressor QGS 90, Инструкция

Страница: 46 / 134

Example of Event History screen
• Scroll through the items to select the desired shut-down or emergency stop event.
• Press the Enter key to find the date, time and other data reflecting the status of the
compressor when that shut-down or emergency stop occurred.
3.14 Week timer menu
Menu icon, Week timer
Function
• To program time-based start/stop commands for the compressor
• To program time-based change-over commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week
in the cycle, one of the four programmed week schemes can be chosen.
• In the controller you can select different timers on one day (up to 8 actions). It is however
not possible to program 2 actions at the same time. The solution: leave at least 1 minute in
between 2 actions.
Example: Start Compressor: 5.00 AM, Pressure Setpoint 2: 5.01 AM (or later).
Procedure
Starting from the Main screen,
• Move the cursor to the action button Menu and press the Enter key.
• Use the Scroll buttons to select the Timer icon. (see below)
• Press the Enter key. Following screen appears:
Instruction book
44 2920 7101 24