22
REAR RACK ASSEMBLY
1.
Locate the needed hardware already installed into the rear end of the frame
*See Pic 1
-
3 (three) 1/2” Bolts
-
2 (two) 4mm Allen Bolts
-
6 (six) Black Spacer Washers
2.
Remove Seat and slide Rack in position in front of Seat Tube
*See Pic 2
3.
Fasten 3 (three) 1/2” Bolts using Black Washers in between the Frame & Rack and
in between Bolt & top of Rack
*See Pic 3
Note: If spacers are not used the Rear Rack Assembly will be off balanced
3. Fasten the 2 (two) 4mm Allen Bolts directly to the Frame Deck
*See Pic 4
Pic 1
Pic 2
Pic 3
Pic 4
