32
Change installation settings
Caution:
These settings should only be carried out by the installer as they may affect the safety and function of the heating system
H
INSTALLER
SETTINGS
Customise the controller according application needs (by installer only)
default settings
( ) = value range
0 Code
Enter Code (= 7) in order to access the menus. It is valid for 1 Hour
1 Application
This controller is suitable for the heating system mentioned on right column
FLOOR see 1.
10
Set temperature
to read
Show set temperature instead of room temperature
NO
12
Number for
floor tempe-
rature
Read the floor temperature as number.
Instead of a temperature in °C a number will be displayed e.g. instead of 28,5 °C, 285 can be
read.
0.0
(-5,0 ... +5,0)
13 Backlight
Continuously OFF or temporarily illuminates after key press.
SHORT (SHORT,
OFF)
14 Language
Select preferred operating language
15 Info
Displays Controller-type and -version.
16
Reset user
settings only
Only USER SETTINGS will be set to factory settings. The energy counter will not be re-set;
to do this see H9).
NO
