Quicksilver 810 Arvor Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 56

background image

Quicksilver 810 Arvor — System & Component Overview and Operation

24

Before operating the windlass, make sure that the safety

lanyard is removed from the anchor.

10. Stern Anchor Windlass (optional)

The anchor windlass located at the stern of the boat assists with the anchoring of your boat by
automatically raising and lowering the anchor. The windlass is operated from the helm or by a
handheld remote control key FOB.

Operation

To operate the windlass, the windlass breaker, located next to the battery switch in the aft bilge, must
be turned ON. Operation of the windlass at the helm is controlled by a momentary switch used to
raise and lower the anchor. Pushing down on the switch will lower the anchor, while pushing up on
the switch raises the anchor.

Built in to the stern windlass is an auto stop function that shuts the motor off once the anchor is fully
retracted and in the stored position on the anchor roller. Mounted on the transom, the leaded core
rope goes through a mounting plate containing sensors. A red auto stop located at the end of the
rope will automatically shut the windlass off when it comes in contact with the sensors in the
mounting plate.

Stern Windlass

11. Bow Thruster

The electric bow thruster assists with the maneuvering of your vessel when docking. Access to the
motor and battery is via the forward berth storage area, while the battery switch is located under the
step in the interior cabin.

Operation from the helm

To operate the thruster, you first must turn the thruster battery switch to the ON position. At the
helm, press the on/off switch on the control panel. An LED will flash and a buzzer will sound

Key FOB

Stern windlass

Stern eye

Stern anchor roller

Anchor

«
...
34
35
36
37
38
...
»

Содержание 810 Arvor

























































Отзывы:

Нет отзывов

Похожие инструкции для 810 Arvor

Бренд: YAMARIN Страницы: 54

Бренд: Stearns Страницы: 20

Бренд: Nortik Страницы: 19

Бренд: Nortik Страницы: 21

Бренд: Nortik Страницы: 22

Бренд: Nortik Страницы: 28

Бренд: Nortik Страницы: 33

Бренд: komodo Страницы: 16

Бренд: Vanguard Страницы: 8

GRAND NARAK 550

Бренд: Nautiraid Страницы: 12

303 Single Seater

Бренд: Access Dinghy Sailing Страницы: 4

Бренд: Ventus Страницы: 54

Бренд: Classic Accessories Страницы: 18

Ciera 2455 Sunbridge

Бренд: Bayliner Страницы: 40

Бренд: Rotax Страницы: 117

Бренд: OPR Страницы: 3

Бренд: Intex Страницы: 48

Бренд: Carver Yachts Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды