Quicksilver 810 Arvor Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 56

background image

13

Quicksilver 810 Arvor — System & Component Overview and Operation

Fresh Water System

Water pump strainer
Water pump
Galley faucet hose
Galley faucet

Water tank fill
Water tank vent
Water tank vent hose
Water tank fill hose
Water tank
Water tank to water pump hose

3. Black Water System (optional)

Your vessel may be equipped with a waste containment / disposal system. This includes a toilet
water pickup, manual flush toilet, a 80 liter holding tank, macerator, discharge seacock, and a
dockside pump out connection.

There are two possible toilet configurations. First, your boat could be equipped with a toilet located
under a cover with a cushion on the starboard side of the cabin, or the toilet could be in an enclosed
compartment located on the starboard side of the cabin.

Operation

Prior to using the toilet, make sure that the toilet water pickup valve, located under the center liner
hatch, is opened. If your boat is equipped with the toilet located under a cover, remove the cushion
covering the toilet lid. Next, rotate the lid over the toilet and remove the inboard toilet wall,
exposing the toilet for use. When not in use, the forward toilet wall and toilet lid should be installed
in place, covering the toilet.

Refer to the toilet owner's manual in regards to specific operation of the toilet. When flushing the
toilet, it will take approximately 19 complete up/down strokes for the contents to reach the holding
tank.

Macerator

The macerator gives the boat operator the means of discharging the holding tank directly
overboard through a seacock in the bottom of the hull. The macerator switch is located inside the

«
...
23
24
25
26
27
...
»

Содержание 810 Arvor

























































Отзывы:

Нет отзывов

Похожие инструкции для 810 Arvor

Бренд: TAKACAT Страницы: 12

600 Super Sun Sport

Бренд: Sea Ray Страницы: 132

Бренд: BRIG Страницы: 44

Бренд: NorthStar Страницы: 66

Бренд: Fountaine Pajot Страницы: 86

Бренд: Grady-White Boats Страницы: 90

Бренд: Tiara Yachts Страницы: 166

Packraft FamilyRaft

Бренд: Nortik Страницы: 9

Бренд: Nortik Страницы: 11

Бренд: Nortik Страницы: 29

Performance H2X

Бренд: Baja Страницы: 83

Бренд: Seatec Страницы: 9

Бренд: Lagoon Страницы: 31

Бренд: OUTDOOR TUFF Страницы: 9

Бренд: Ranger Tugs Страницы: 36

Бренд: WARRIOR BOATS Страницы: 80

BASS RAIDER 10E

Бренд: Pelican Страницы: 3

330 Sport Bridge

Бренд: Silverton Страницы: 161

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды