Quicksilver 810 Arvor Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

background image

Quicksilver 810 Arvor — General Information

10

360

o

All Around Light (White), visible 2NM

112.5

o

Stbd Navigation

Light (Green), visible 2NM

All around light folds downs on the

hardtop

112.5

o

Port Navigation

Light (Red), visible 2NM

12. Engine

Your boat is propelled by a single Mercury diesel inboard engine. The maximum propulsion power
rating for the craft is 169 kW. Do not operate this craft with an engine power rating larger than that
posted on the power capacity label in the craft. The maximum power rating label is located at the
helm, under the capacity plate.

Quicksilver® recommends that you fully comply with the manual provided by the engine
manufacturer. Follow the recommended maintenance and warranty schedule in your Engine
Operator’s Manual. Refer to the Engine Owner’s Manual for operating instructions and warranty
information. The engines are under warranty from Mercury, not by Quicksilver®.

Do not operate this craft with an engine of rated power

greater than that posted on the capacity label. Do not

operate at maximum speed while in congested waterways,

or in weather or sea conditions of reduced visibility, high

winds or large waves. Reduce speed and wake as a courtesy

to others. Observe & obey speed limits and no wake zones.

The International Regulations for Preventing Collisions at

Sea (COLREG) and the rules of the road require that a

proper lookout be maintained at all times and observance

of right of way be respected. Always be certain to have

sufficient distance to stop or manoeuver if required to avoid

collisions.

«
...
20
21
22
23
24
...
»

Содержание 810 Arvor

























































Отзывы:

Нет отзывов

Похожие инструкции для 810 Arvor

Бренд: Regal Страницы: 437

Бренд: Thaijetboard Страницы: 32

KAYAK-BW-01-PK-iKAYAK-RED

Бренд: Bluewave Страницы: 6

Бренд: HonWave Страницы: 38

Бренд: Pelican Страницы: 14

Бренд: Yamaha Страницы: 131

Бренд: Performance Catamarans Страницы: 41

Бренд: FitNord Страницы: 84

Бренд: Walker Bay Страницы: 17

SUN ODYSSEY 42 DS

Бренд: Jeanneau Страницы: 30

GP1300R WaveRunner 2008

Бренд: Yamaha Страницы: 98

Бренд: Brunswick Страницы: 148

Бренд: Skeeter Страницы: 31

Бренд: Sea Eagle Boats Страницы: 6

LongBoard SUP LB11

Бренд: Sea Eagle Boats Страницы: 11

Бренд: Sea Eagle Boats Страницы: 14

Бренд: Sea Eagle Boats Страницы: 14

Бренд: Sea Eagle Boats Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды