LIFT / LOWER
BACKBOARD
HEIGHT ADJUSTMENT OF THE RIM / BACKBOARD:
MOVING THE BALLER MINI HOOP SYSTEM:
WARNINGS:
Height adjustment must be carried out
by an adult. Take care when adjusting the height,
moving parts may cause entrapment if these
instructions are not followed. Do not allow children
to move or adjust the height of the system.
When adjusting height or moving the system. Keep
hands and fingers away from moving parts.
Always ensure that you support the weight of the
backboard during height adjustment. Do not remove
the pin without first supporting the backboard
weight, doing so may cause the backboard to fall in
an uncontrolled manner.
1. Support the weight of the backboard with one hand, by
holding the black plastic bumpers.
2. Remove the height adjust pin.
3. Lift or lower the backboard to the desired position.
4. Insert the height adjust pin in the nearest hole.
5. Ensure the pin is fully inserted through both sides of the
Height Adjust Collar before play.
1. Lower the Rim to its lowest height position using the
above instructions.
2. Holding the pole and lower edge of the backboard with
two hands, tilt the unit forward until the wheels contact
the ground.
3. Move the System to the new location, taking care to
ensure that the Base does not scrape / catch on the
ground.
4. Slowly lower the base down until the pole is upright.
IMPORTANT:
After moving the BALLER MINI HOOP
SYSTEM make sure the base is level and the System is
stable before play.
2 YEARS PARTS WARRANTY:
The BALLER MINI HOOP SYSTEM is covered by a 2 YEAR Limited Warranty.
This warranty does not cover the mini basketball provided with the unit, general
wear and tear, or damage resulting from accident, misuse, abuse or lost parts.
Register your 2YR warranty within 15 days of purchase visit:
Warranty.QuickPlaySport.com
or scan this code:
3
