Instructions for Feeder Feet Gen2
THANK YOU for your purchase of the Feeder Feet Gen2. Please read this sheet before
operating the unit. If you should have any questions about this product or any other
Moultrie product, please contact us using the information on the back of this sheet.
To help us to better serve you and to activate your Lifetime Warranty, please submit
your warranty information online at
http://www.moultriefeeders.com/warranty
INSTALLING ON 1.5” SQUARE TUBE LEGS
A
Remove pin from feeder feet assembly.
Slide whole assembly into 1.5” Square tube feeder leg.
Insert pin through hole of leg and adapter.
Insert Stake through foot into the ground to the desired depth.
Repeat for all three feeder feet.
WARNING:
Do not use feeder feet on hard/slick ground or surfaces without stakes.
MOULTRIE_Feeder Feet Gen2 Manual-ENGLISH_8-13-20.indd 1
MOULTRIE_Feeder Feet Gen2 Manual-ENGLISH_8-13-20.indd 1
8/17/20 8:32 AM
8/17/20 8:32 AM
