OPERATION MANUAL
Press “
+
” Press “OK”
Step
③
Step
④
password: ***
select: 0
password: ***
select: 1
password: ***
select: 1
1. When carry on the forth step (Step
④
), if press
“
SET
”
key, you can browse and modify parameter of
this flow, shown as C-1 item.
2. After finishing modifying of working flow 1, if you want to modify the next working mode, operate as C
item shows; If you don
’
t want to modify it, yon can press
“
-
”
key to browse the next parameter settings.
C．
Modify Working Flow
For instance: Modify the working flow and make it become 1 flow.
Press “
-
” Press “
SET
”
password: ***
select: 1
type: solder
select: 1
Press “
-
”
或
“
+
” Press “OK”
select: 1
type: desolder
select: 1
type: solder
select: 1
type: desolder
C-1. Modify Parameter of Working Flow
1. If it is necessary to modify parameter of a working flow, first you must select the working flow and then
modify its parameter.
2. The modification of parameter must accord with the following technics graph.
The soldering technics is decided by T0, TB, T1, T2, T3, S1, S2 and S3. It describes the temperature graph
during the system working. TL denotes Melting temperature of solder and the range between T2 and T3.
T0
Page 7
