Quest Engineering DL1300, Руководство по развертыванию

Страница: 44 / 57

DL1300 Appliance
Protecting a machine
44
The password used to connect to this machine.
6. Click Next. If the Protection page appears next in the Protect Machine Wizard, skip to Step 7.
NOTE: If the Install Agent page appears next in the Protect Machine Wizard, this indicates that the
Agent software is not yet on installed on the designated machine. Click Next to install the Agent
software. The Agent software must be installed on the machine you want to protect, and that be
restarted, before it can back up to the Core. To have the installer reboot the agent machine, select the
After installation, restart the machine automatically (recommended) option before clicking Next.
7. The host name or IP address you specified in the Connect dialog box appears in this text field. Optionally,
enter a new name for the machine to be displayed in the Core Console.
8. Select the appropriate protection schedule:
◦ To use the default protection schedule, in the Schedule Settings option, select Default protection (3 hour snapshots
of all volumes). With a default protection schedule, the Core will take snapshots of the agent machine once every
3 hours. Snapshots of the agent machine can be taken once every hour (minimum). To change the protection
settings at any time after you close the wizard, including choosing which volumes to protect, go to the Summary
tab for the specific agent machine.
◦ To define a different protection schedule, in the Schedule Settings option, select Custom protection.
9. Select one of the following:
◦ If you selected a Typical configuration from the Protect Machine Wizard and specified default protection, then click
Finish to confirm your choices, close the wizard, and protect the machine you specified.
◦ The first time protection is added for a machine, a base image (that is, a snapshot of all the data in the protected
volumes) will transfer to the repository on the Core following the schedule you defined, unless you specified to
initially pause protection.
◦ If you selected a Typical configuration for the Protect Machine Wizard and specified custom protection, then click
Next to set up a custom protection schedule. For details on defining a custom protection schedule, see Creating
Custom Protection Schedules.
◦ If you selected Advanced configuration for the Protect Machine Wizard, and default protection, then click Next and
proceed to Step 12 to see repository and encryption options.
◦ If you selected Advanced configuration for the Protect Machine Wizard and specified custom protection, then click
Next and proceed to Step 10 to choose which volumes to protect.
10. On the Protection Volumes page, select the volumes on the agent machine that you want to protect. If
any volumes are listed that you do not want to include in protection, click in the Check column to clear the
selection. Then click Next.
NOTE: It is recommended to protect the System Reserved volume and the volume with the operating
system (typically the C drive).
11. On the Protection Schedule page, define a custom protection schedule.
12. On the Repository page, select Use an existing repository.
13. Click Next.
The Encryption page is displayed.
14. Optionally, to enable encryption, select Enable Encryption.
Encryption key fields appear on the Encryption page.
NOTE: If you enable encryption, it will be applied to data for all protected volumes for this agent
machine. You can change the settings later from the Configuration tab in the AppAssure 5 Core
Console.