Queensgate NANOSCAN NPC-D-6110, Руководство пользователя

Страница: 10 / 34

E N - 0 1 4 6 3 5 - U M R e v 2 N P C - D - 6 x x 0 N a n o M e c h a n i s m C o n t r o l l e r U s e r M a n u a l Page 10 of 34
w w w . n a n o p o s i t i o n i n g . c o m
2.2
NPC-D-6xx0 Series Performance Specifications
Table 2-2: NPC-D-6xx0 Performance Specification
Parameter Value Units Comments
General
Warm up time 40 (typ) Min
“ANA I/P” analogue input
position command per
channel
-10 to +10 V
Connector BNC
– Single ended
MAXIMUM input: ±15V
“ANA I/P” analogue input
impedance (per channel)
> 50k Ohms
“POS MON” analogue output
position monitor per channel
-10 to +10 V
Connector BNC - Single ended
MAXIMUM output: ±15.5V
“POS MON” analogue output
current (per channel)
± 5m A Maximum drive/sink current
“IN-
POSITION”
Output,
“TRIG”
Output
Stepped
Output
Logic “0”
< 0.8 V
15 pin D-Type on rear panel.
For OUTPUTS
Load impedance: > 1k ohms.
MAXIMUM output: 5.5V
For INPUTS
Input impedance: 50 ohms.
MAXIMUM input: 5.5V
Logic “1”
2.4 to 5 V
“TRIG” Input
Stepped
Input
Logic “0”
< 0.8 V
Logic “1”
2.4 to 5 V
NanoMechanism interfacing
– controller – per channel
Connector 17W2 D type ------- Mixed signal connector
HV output swing
-20 to +120 or
-30 to +150 V
Factory set but software
selectable
HV drive current 160mA mA
HV amplifier bandwidth TBD kHz
HV amplifier intrinsic noise 0.3 mV