PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
The five connection wires and their pads on the circuit board have only little distance
between themselves. After soldering them it has to be checked if on the top side or the
bottom side of the board are short circuits between the pads / pins. If necessary remove
the unwanted connections with de-soldering wick or with a de-soldering pump.
Check here again if the connection wires have no connection to the cooling element of the
voltage regulator.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
59 / 75
Figure 65: Voltage regulator mounted
