PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
2.9 Small Transistors
The nine small transistors can be available in two different versions:
At the version on the right side of the picture the pins are bent already an can be mounted
directly. The transistor on the left has straight connector pins which have to be bent up with
the pliers a bit
Direct touching of the connection wires with the hands should be
avoided. By electrostatic load the transistors can be damaged.
ESD- shoes or ESD- straps are helpful here.
The plastic housing can be touched without problems. If the pins have to be bent, a pliers
with plastic handle should be used.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
50 / 75
Figure 53: Variants of the TO92-housing
