7
Assembly Instructions
STEP 1: Attach the Control Valve to the Resin Tank
A. Locate the Master O-ring (from Parts Bag B) and lightly coat with silicone lubricant (from Owner’s Manual Zip-
lock Bag). Insert into bottom of control valve as shown below.
B. Connect the upper distributor to bottom of control valve, line up slots and twist as shown below.
C. Center the riser pipe within the resin tank.
D. Attach the control valve to the resin tank by sliding the upper distributor over the riser pipe.
E.
Securely tighten the control valve by hand, tightening it clockwise.
Twist to securely seat