Quantum StorNext M660 Скачать руководство пользователя страница 67

Страница: 67 / 86

Chapter 3: Basic System Operations

Upgrading Firmware

StorNext M660 Metadata Appliance Hardware Guide

Firmware Upgrade

Process and Time

Estimates

There are several factors that affect the availability of the system and

metadata operations during upgrades. StorNext appliance firmware

upgrades (contained in the .fw file downloaded earlier in this process)

always include an update to the StorNext software in the release, and

can also includes updates to MDC node firmware and metadata array

firmware. The way in which these updates are applied and the impacts

to system availability vary, depending on which firmware upgrade being

applied, as described here:

StorNext Releases/Downtime Requirements

Note:

Metadata array operations and the StorNext file system are

unavailable while metadata firmware is installed. We refer to

suspension of metadata operation as a

downtime upgrade

since no array I/O may take place during this time.

Note:

The upgrade of metadata appliance firmware also, once

installed, initiates a reboot of both MDC nodes prior to 5.1.1,

requiring additional time. Plan upgrade times accordingly.

StorNext Releases requiring suspension of metadata operations during

upgrades occur any time a newer release contains a newer metadata

array firmware version than the version currently installed on the

appliance.
The following table contains examples of firmware upgrade versions.

Upgrading StorNext Release with a newer firmware will be a

downtime

upgrade

StorNext Release*

Array Firmware Version

5.1.1

08.10.13

5.1

07.84.46

5.0.1

07.84.46

4.7.1

07.84.46

Содержание StorNext M660























































































Результаты поиска

Содержание StorNext M660

Отзывы:

Похожие инструкции для StorNext M660

Бренды по названию

Популярные бренды

Quantum StorNext M660, Руководство по оборудованию

Результаты поиска

Содержание StorNext M660

Отзывы:

Похожие инструкции для StorNext M660

Бренды по названию

Популярные бренды