Quantum StorNext M660, Руководство по оборудованию

Страница: 40 / 86

Chapter 2: Hardware Overview
StorNext M660 Connectivity
34 StorNext M660 Metadata Appliance Hardware Guide
Metadata Expansion Unit — General LED Behavior
The drive enclosure is the same type as the Metadata Array. For more
information about the Metadata Expansion Unit LED locations and
general behavior, refer back to Metadata Array — General LED Behavior
on page 29.
StorNext M660 Connectivity
This section covers:
• StorNext M660 Power Cabling
• StorNext M660 SAS Cabling
• StorNext M660 SAN Cabling
• StorNext M660 LAN Cabling
• StorNext M662 Lattus Cabing
StorNext M660 Power
Cabling
Connect the power cables for each component into an available power
outlet (see Figure 16 on page 35).
Note: Quantum recommends attaching the primary and secondary
power connections to alternate power sources for resiliency.
Quantum also recommends that one of these power sources be
an uninterruptible power source, such as battery backup or
generator, or be connected to redundant AC power supplies to
avoid system interruption in the case of a power failure.