Setup Wizard
31
Scalar 50 Tape Library
3
For the network information such as the IP address to be active or take effect, you
must power down the library by holding down the power button located on the front
of the library after changing any of the network settings (see
figure 22
).
The library shuts down.
4
Push the power button to start the library.
The Scalar 50 tape library is initially configured. To complete the installation, continue
with
Setup Wizard
.
Setup Wizard
The
Setup Wizard
leads you through the process of setting up the most common options
for this library to be operational. Detailed customization options, including settings
modified by this wizard, can be changed via the menus under the
Setup
tab.
1
On the host computer, open the internet browser software.
2
In the
Address
field, type
http://IPaddress/
where IP address is the IP address for the
Quantum Scalar 50.
3
Enter the username and password and click
OK
.
The
Overview
page displays (see
figure 39
):
Note:
The library will need to reboot for changes to take effect. Host application
software may need to be restarted/rebooted as well.
Note:
The default username and password is
admin
.
