Installing the Library
15
Scalar 50 Tape Library
Installing the Library Chassis
0
1
The back mounting brackets are lettered (A through I) so the correct mounting
position is easily determined. The mounting positions differ depending on the depth
of the rack (see
table 4
).
Table 4 Back Mounting Bracket
Orientation
Warning:
The Scalar 50 tape library weighs approximately 52 lbs (23.6 kg). At least
two people are required to lift and install the library.
Note:
If the depth of the rack is less than 27 in, do not install the back mounting
brackets or clamps.
Rack Depth
Back Mounting Bracket
(Mounting Position)
Back Mounting Clamp
#1 Holes
#2 Holes
24 to 25 in.
Back bracket and clamp not
required
N/A
N/A
25 to 26 in.
Back bracket and clamp not
required
N/A
N/A
26 to 27 in.
Back bracket and clamp not
required
N/A
N/A
27 to 28 in.
Use holes A and C
X
28 to 29 in.
Use holes B and D
X
29 to 30 in.
Use holes C and E
X
30 to 31 in.
Use holes D and F
X
31 to 32 in.
Use holes E and G
X
32 to 33 in.
Use holes F and H
X
33 to 34 in.
Use holes G and I
X
#1 Holes
#2 Holes
Back mounting bracket
Back mounting clamp
