18
Installing the Library
Scalar 50 Quick Start Guide
Figure 12 Installing the Scalar
50 in the Rack
4
Secure the back of the library to the rack with two mounting clamps (see
table 4
for
information on the correct mounting holes to use) and two M5 x 10 Allen screws on
each clamp (see
figure 13
).
5
Secure the mounting clamps to the rack rails with two Phillips screws on each side
(see
figure 13
).
Note:
If the depth of the rack is less than 27 in, do not install the back mounting
brackets or clamps.
Phillips screws
