20
KEY
(white) -
Ignition lead
„
+12/24V
(red) -
Power lead (+)
Connect to an accessory terminal in the fuse
Connect to a live terminal in the fuse block
block controlled by the car ignition key
connecting to the car battery
(+12V=ON)
…
GROUND
(black) -
Power lead (-)
‚
GROUND
(black) -
Power lead (-)
Connect to the battery negative pole (car
Connect to the battery negative pole (car
chassis)
chassis)
†
AUX +12V
(grey) -
Power output lead for
ƒ
BRAKE
(blue) -
Parking brake control
accessory parts
lead
Connect to the device to feed (12V/30 mA
Connect to parking brake of the car ( video
max). The device is supplied with power
output enable)
when it is switched on.
Installation and Connections
FRONT PANEL
First Use
9
WARNING:
Voltage is always on (12Vcc) at the
connectors F (ANT 1 and ANT 2) to
power the antennas. DO NOT POWER
THE ANTENNAS WITH DIFFERENT
VOLTAGE
FAVOURITE TV
1 Channel TV
2 Channel TV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
7 Channel TV
TV LIST
[GREEN] to change list
TUNING
[OK] to start search - [EXIT] to quit
TV LIST
ADD FAVOURITE: [OK] to confirm - [EXIT] to quit
SETTINGS
DIAGNOSTICS
CREATE
SORT
DEL.CHAN
DEL.LIST
FAVOURITE TV
TV LIST
1 Channel TV
2 Channel TV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
7 Channel TV
[GREEN] to change list
1
1
v
Autotracking and Autosearch
These innovative functions make the receiver's daily use
easier.
They have the purpose to select a channel by the remote
control and to show it without starting a tuning manual
searching, in case of frequencies changing during the
transmissions.
To optimize Autotracking and Autosearch functions it's
necessary to follow carefully the instructions:
1.Start an autoscan
to tune the available channels in
that specific area by pressing [SCAN] button
2.Create a FAVOURITE TV LIST
to organize in
sequence your own favourite channels
‚
3. Select the FAVOURITE TV LIST as default
ƒ
If autosearch does not allow to tune all the favourite
channels, start again the operations described at the point
1 and 2 in an other geographic area.
WARNING: channels marked with this symbol are
temporarily not available upon network coverage
„
.
WARNING: channels marked with this symbol are
temporarily not available upon network coverage .
„
1
1
4
6
3
GND
ANT IN
IR Receiver
• KEY - White
‚
• GROUND - Black
ƒ
• BRAKE - Blue
„
• IN +12/24V - Red
…
• GROUND - Black
†
• AUX +12V - Grey
ANTENNA 2
ANTENNA 1
