Installation
19
10
Daily Use
v
How to switch the receiver on
Use the [ ] button on the remote control
to turn the
receiver on/off
v
How to select a channel
A Tv or Radio channel can be selected by three different
modes:
• DIRECT: select the desired channel by using the numeri-
cal buttons
…
• ZAPPING: select the desired channel by using the
up/down buttons[
5
] e [
6
]
‡
and press [OK]
ƒ
to con-
firm the selection.
INFORMATION BAR will be previewed on the screen
ˆ
before the channel tuning.
• DIRECT ZAPPING: press [P+] [P-]
†
to browse directly
trough the channels without using the [OK]
ƒ
button.
15 Channel TV
Program title
TV
12:17
12:00
12:45
“
“
SCAN
A/V
OK
P+
P
V+
CHANNEL
1
2
3
4
5
6
7
8
0
9
EXIT
BACK
MUTE
LIST
info
MENU
TV
RADIO
@ ? ! .
a b c
g h i
j k l
m n o
p q r s
t u v
_ + *
w x y z
d e f
‚
…
ƒ
„
†
‡
WARNING
MAKE THE CORRECT CONNECTIONS
Failure to make the proper connections
may result in product damage
USE ONLY IN CARS WITH A 12 / 24
Vcc NEGATIVE GROUND
HAVE THE INSTALLATION DONE BY
Failure to do so may result in fire, electric
QUALIFIED PERSONNEL
shock or other injury
The installation and wiring of this unit
require special technical skills and expe-
BEFORE WIRING DISCONNECT THE
riences. To ensure safety always have
C A B L E F R O M T H E N E G A T I V E ( - )
the installation done by experts
BATTERY TERMINALS
Failure to do so may result in electric
USE SPECIFIED ACCESSORY PARTS
shock or injury due to electrical shorts
Be sure to use only the specified acces-
sory parts. Use of other than designed
DO NOT SPLICE INTO ELECTRICAL
accessory parts may damage this unit or
CABLES
cause an incorrect functioning of the
Never cut away cable insulation to supply
appliance
power to other equipment. Doing so will
exceed the current carrying capacity of
ARRANGE THE WIRING CORRECTLY
the wire and result in fire or electric shock
Route the electrical and audio/video
cables and wiring away from moving
DO NOT USE BOLTS OR NUTS IN THE
parts or sharp or pointed edges. This
BRAKE OR STEERING SYSTEM TO
will prevent crimping and damage to the
MAKE GROUND CONNECTIONS
wiring. If wiring passes through hole in
Bolts or nuts used for the brake or steer-
metal, use a rubber grommet to prevent
ing systems (or any other safety-related
the wires insulation from being cut by
system), or tanks should NEVER be used
the metal edge of the hole
for installations or ground connections
DO NOT INSTALL IN LOCATIONS
DO NOT INSTALL IN LOCATIONS
WITH HIGH MOISTURE OR DUST
WHICH MIGHT HINDER VEHICLE
Avoid installing the unit in locations with
O P E R A T I O N , S U C H A S T H E
high incidence of moisture or dust.
STEERING WHEEL OR GEARSHIFT
Moisture or dust that penetrates into
Doing so may obstruct forward vision or
this unit may result in product failure
hamper movement etc., and result in seri-
ous accident
WARNING:
Before installing the device
read carefully the following instruc-
tions
!
