Quantum Q-Logic 3, Основные инструкции по эксплуатации

Страница: 15 / 32


Settings Screens
The following pages explain the various screens you will use with the Q-Logic 3 Controller. Contact your
Quantum Rehab Provider with any questions you may have.
NOTE: Some screens in this Basic Operating Instructions may differ from your system depending
on configuration and options selected.
To change a sound setting:
1. Push the Home Screen button.
2. Push the joystick left to enter settings screen.
3. Push the joystick up or down through the
available setting subjects.
4. When the desired subject is highlighted on the
settings screen, push the joystick to the right to
enter that subject.
NOTE: At any time a left command will return
to the previous menu.
Home Screen
Settings
After "Sound" is highlighted, a right command will
show.
When a setting has a box, a right command
"checks" (enables that setting). Another right
command will "uncheck" (disable that setting).
NOTE: Any time a setting is changed, the system will back up the configuration to the power
base. When the system is turned off, "parameter backup in progress" will be displayed on the
screen before the system turns off.

















After "System beeps" is highlighted, a right
command will show.








Sound
System Beeps