iLevel® Feature (Optional)
Your power chair may be equipped with the iLevel® feature that will be used in conjunction with your
TRU-Balance® 3 Power Positioning System. The iLevel® feature is mounted on a Quantum power base
for enhanced stability when the seating system is elevated.
There are certain situations, including some medical conditions, where the power chair user will need
to practice operating the power chair equipped with iLevel® in the presense of a trained attendant. A
trained attendant can be defined as a family member or care professional specially trained in assisting
a power chair user in various daily living activities.
As you begin using iLevel® during daily activities, you will probably encounter situations in which you
will need some practice. Simply take your time and you will soon be in full and confident control.
Elevation (Seat Screen)
The iLevel® feature can be activated by selecting the elevating seat actuator.
To select and adjust the seat elevation using the Q-Logic 3 Controller:
1. Push the On/Off and Mode Select Lever up once to power on the chair and the controller.
2. Push the On/Off and Mode Select Lever up several times until the seat screen is displayed on the
LCD or push the key 2 select button once to go directly to seat screen.
See figure 1.
3. Push the joystick to the left or right to cycle through to the elevating seat mode, this is illuminated on
the actuator indicator.
See figure 1.
NOTE: If your Q-logic 3 settings are different than those described, contact your Quantum Rehab
Provider. Your Quantum Rehab Provider may have changed the programming of your Q-Logic
3 Controller.
4. When the elevating seat mode is selected, give a forward command to the joystick to adjust position
in one direction or give a reverse command to the joystick to adjust position in the opposite direction.
5. If you want to return to another profile, push up and release the On/Off and Mode Select Lever until
you return to the desired drive profile.
To activate the iLevel® using a single switch:
1. Press once and hold the single switch once to raise the seat and activate iLevel®.
2. Press and hold the single switch to lower the seat.
NOTE: The iLevel® feature is automatically engaged when the power elevating seat is activated
and the iLevel® indicator is displayed on your controller. See figure 2.
The power chair should be used on an indoor, level surface, such as malls, offices, and/or medical
facilities to activate iLevel®. Once the seating system actuator is started, the iLevel® boots inhibit
movement on the front caster arms. The seating system can be reclined or tilted up to 20° while the
iLevel® feature is activated.
