Quantum PX500 Series FC1202 Upgrade Instructions
81-81351-01 C01
April 2006
6
FC1202 Upgrade Procedure
Removing Tape Drive
SCSI Jumper Cables
0
Each pair of tape drives within the library are connected via a SCSI jumper
cable. These cables must be removed prior to cabling the FC1202.
1
Locate the SCSI jumper cables connecting each pair of tape drives in the
library and the host systems (see
figure 3
for PX502,
figure 4
for PX506,
and
figure 5
for PX510). The tape drives are numbered 1 through 10
(depending on library model) starting in the top-left drive bay. Tape drive
1 is in the upper right-hand drive bay, tape drive 2 is in the upper left-
hand drive bay, and so forth. Refer to the following illustrations for exact
tape drive numbering.
Figure 3 PX502 Cabling
Configuration
Tape drive 2
Tape drive 1
SCSI
terminator
SCSI
jumpers
Host computer
