Quantum PX500 Series FC1202 Upgrade Instructions
81-81351-01 C01
April 2006
4
Preparing for the FC1202 Installation
Preparing for the FC1202 Installation
0
Before beginning the installation procedure, make sure that you have the
required upgrade kit and tools.
Required Upgrade Kits
0
The FC1202 installation requires the following upgrade kit for every two tape
drives in a PX500 Series library (see
table 1
):
Table 1 FC1202 Upgrade
Kit PN PR-UU9CF-YF
Required Equipment
(Customer Supplied)
0
A zonable Ethernet switch is required if multiple FC1202 Fibre Channel
bridges are installed in either a PX506 or PX510 library. If a single FC1202
Fibre Channel bridge is installed, an Ethernet switch is not required.
Required Tools
0
The following tools are required to install the FC1202 bridge upgrade:
• #2 PHILLIPS® screwdriver
FC1202 Upgrade Procedure
0
The upgrade procedure is identical regardless of the number of FC1202s
installed except where noted. The upgrade procedure consists of the
following major steps:
•
Preparing the Quantum PX500 Series Library
•
Removing Tape Drive SCSI Jumper Cables
•
Installing the FC1202 Bridge
•
Installing the Ethernet Cables
•
Installing SCSI Jumper Cables
Note:
All part numbers are subject to change without notice.
Qty
Description
1
FC1202 PWA
2
SCSI Cables
1
Ethernet cable
1
Terminator
1
Quantum PX500 Series FC1202 Upgrade Instructions
