Chapter 6 Fibre Channel Management
Cabling the FC420s to the PMC
60
MC300 Prism Management Card User’s Guide
Cabling the FC420s to the PMC
6
Fibre Channel Management requires a physical Ethernet
connection between the PMC and all installed FC420 bridges. The
physical connection is not provided with your library.
Use these instructions to cable the FC420 bridge (or bridges) to the
PMC.
Cabling a Single FC420
6
To cable a single FC420 to the PMC:
1
Use an Ethernet cross-over cable to connect the bottom
Ethernet port on the PMC (ETH 1) to the Ethernet port on the
FC420 bridge (see
and
Note:
These instructions call out specific Ethernet cables to be
used with a 100 Mbit per second Ethernet hub/switch.
Attach the hub/switch in a convenient location, based on
cable lengths and routing. The hub/switch need not be
located or mounted in the rack that contains the library
(or libraries).
These Ethernet cables and Ethernet hub/switch are not
supplied with your library and must be obtained
separately.
Note:
The 10-foot (3 meter) Ethernet cross-over cable
supplied with the FC420 can be used if you are
unable to obtain a short cable.
Содержание MC300 Prism
