Quantum LTO-5 HH SAS C, Техническое справочное руководство

Страница: 49 / 118

Chapter 4: Operations
Diagnostic and Maintenance Functions
Quantum LTO-5 HH SAS Model C User’s Guide 43
1 Run Drive Diagnostics: Runs tests to
determine whether the drive can
properly load and unload cartridges,
and read and write data.
Function Code 1: Run Drive
Diagnostics on page 46
2 Update Tape Drive Firmware from FUP
Tape: Loads updated firmware from a
firmware update (FUP) tape.
Function Code 2: Update Drive
Firmware from FUP Tape on page 47
3 Create FUP Tape: Copies its firmware
update (FUP) data to a customer-
supplied scratch (blank) data cartridge.
Function Code 3: Create FUP Tape on
page 48
4 Force a Drive Dump: Performs a dump
of data (also known as saving a
microcode trace).
Function Code 4: Force a Drive Dump
on page 49
5 Copy Drive Dump: Copies data from a
drive dump (captured by using
Function Code 4) to the beginning of a
customer-supplied scratch (blank) data
cartridge, copies a drive dump to flash
memory, or erases a dump from flash
memory.
Function Code 5: Copy Drive Dump on
page 49
6 Run Host Interface Wrap Test: Performs
a check of the circuitry from and to the
connector.
Function Code 6: Run Host Interface
Wrap Test on page 51
7 Run RS-422 Wrap Test: This test causes
the drive to perform a check of the
circuitry and connector for the RS-422
interface.
Function Code 7: Run RS-422 Wrap
Test on page 52
8 Unmake FUP Tape: Erases the FUP data
on a customer-supplied scratch (blank)
data cartridge and rewrite the cartridge
memory on the tape. This turns the
cartridge into a valid customer-
supplied scratch data cartridge.
Function Code 8: Unmake FUP Tape on
page 53
Function Code Diagnostic or Maintenance Function Instructions Location