Quantum DXi6900-S Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 71

Quantum DXi6900-S Скачать руководство пользователя страница 71

Contacting Quantum

Contacts

For information about contacting Quantum, including Quantum office locations, go to:

http://www.quantum.com/aboutus/contactus/index.aspx

Getting More Information or Help

For further assistance, or if training is desired, contact the Quantum Customer Support Center:

Region

Support Contact

North America

1-800-284-5101 (toll free)

+1-720-249-5700

EMEA

+800-7826-8888 (toll free)

+49 6131 324 185

Asia Pacific

+800-7826-8887 (toll free)

+603-7953-3010

For worldwide support:

http://www.quantum.com/serviceandsupport/get-help/index.aspx#contact-support

Comments

To provide comments or feedback about this document, or about other Quantum technical publications,
send e-mail to:

[email protected]

Contacting Quantum

Quantum DXi6900-S Installation Guide

71

© 2016 Quantum Corporation. All rights reserved. Your right to copy this manual is limited by
copyright law. Making copies or adaptations without prior written authorization of Quantum
Corporation is prohibited by law and constitutes a punishable violation of the law. Artico, Be
Certain (and the Q brackets design), DLT, DXi, DXi Accent, DXi V1000, DXi V2000, DXi
V4000, DXiV-Series, FlexTier, Lattus, the Q logo, the Q Quantum logo, Q-Cloud, Quantum
(and the Q brackets design), the Quantum logo, Quantum Be Certain (and the Q brackets
design), Quantum Vision, Scalar, StorageCare, StorNext, SuperLoader, Symform, the
Symform logo (and design), vmPRO, and Xcellis are either registered trademarks or
trademarks of Quantum Corporation and its affiliates in the United States and/or other
countries. All other trademarks are the property of their respective owners. Products
mentioned herein are for identification purposes only and may be registered trademarks or
trademarks of their respective companies. All other brand names or trademarks are the
property of their respective owners. Quantum specifications are subject to change.

www.quantum.com

«
...
69
70
71

Содержание DXi6900-S








































































Отзывы:

Нет отзывов