Initializing the Storage Arrays and Software
Quantum DXi6900-S Installation Guide
41
-Get Tray Info-
-Get Controllers Info-
-Get Drives Info-
-Get EBODs Info-
-Found EBOD 0-
Probing for array 2 CTRL A: Not Found.
Probing for array 2 CTRL B: Not Found.
Detecting -end-
Done. Output in /opt/DXi/hwdetect/factory.config
2. On the
Pick to Order Menu
, type the number option for
Check Hardware
and press
<Enter>
.
The
Pick To Order Hardware Check Menu
displays (see Figure 32 below).
Figure 32:
PTO: Hardware Check Menu
*** Pick to Order Hardware Check Menu ***
0) Check Memory
- check memory size to number of trays.
1) Check NetApp Trays - check for valid tray combinations.
2) Check HBAs
- check for valid PCI slots and cards.
3. On the
Hardware Check Menu
, type the option for
Check Memory
and press
<Enter>
.
The system displays information about the installed memory (see Figure 33 below).
Make sure the memory configuration is valid before continuing. If the memory configuration is not
correct, resolve the issue before continuing (see
).
Figure 33:
PTO: Check Memory (Example)
Detected Memory size: (256 GB)
Memory size OK for the attached 1 tray(s) of external storage.
4. On the
Hardware Check Menu
, type the option for
Check NetApp Trays
and press
<Enter>
.
The system displays information about attached Array Modules (RBODs) and Expansion Modules
(EBODS) (see Figure 34 on the next page).
