Quantum DXi4510, Руководство пользователя

Страница: 179 / 292

Chapter 9: DXi4000 Configuration
Replication
Quantum DXi4000 User’s Guide 155
Replication
The Replication Configuration page allows you to configure the
DXi4000 to act as a replication source or target. A source
sends
replicated data to a target, and a target
receives
replicated data from up
to 10 sources. A DXi4000 can act as both a source and a target.
Note: For more information about data replication, or to perform
data replication, see DXi4000 Replication on page 81.
To access the Replication Configuration page, click the Configuration
menu, and then click the Replication tab.
The Replication Configuration page contains the following tabs:
• Replication Send
• Replication Receive
Replication Send
The Replication Send page allows you to specify the target system the
DXi4000 will send replicated data to. You must specify the replication
target before you enable replication for a NAS share. When replication is
enabled for a share, replicated data is sent to the target system during
scheduled or manual replication.
Note: For more information about enabling and scheduling
replication for a share, see Send NAS on page 88.
To access the Replication Send page, on the Replication
Configuration page, click the Send tab (see Figure 88 ).