Quantum DXi4510, Руководство пользователя

Страница: 72 / 292

Chapter 4: DXi4000 Configuration Wizards
NAS Wizard
48 Quantum DXi4000 User’s Guide
Step 4: Add Share
1 Under Add Share , enter information about the NAS share (see
Figure 21 ):
• Name - Enter the name of the NAS share.
• Description - (Optional) Enter a brief description of the share.
• Enable deduplication - Select the check box to enable data
deduplication. Quantum recommends that you enable data
deduplication to optimize disk usage.
Note: Data deduplication is enabled by default. You cannot
enable or disable data deduplication after the share is
added.
• Hide from network browsing - (Windows shares only) Select
the check box to hide the share from network browsing. If
selected, you cannot see the share when browsing the network.
• Export Protocol - (Available only if you selected the Both
option in Step 2: Protocol on page 45) Select the export
protocol for the share:
• CIFS - Select the CIFS option to use the share on a Windows
network.
• NFS - Select the NFS option to use the share on a UNIX or
Linux network.
2 Click Add .
3 (Optional) To add additional shares, repeat Steps 1–2.
4 Click Next to continue.