Quantum DXi4510, Руководство пользователя

Страница: 181 / 292

Chapter 9: DXi4000 Configuration
Replication
Quantum DXi4000 User’s Guide 157
Note: Encryption is enabled by default. However, for best
performance, if your data network is already secured, you
should clear the Use Encryption check box.
4 Click Apply .
5 If necessary, click Resume to resume the replication service.
Replication Receive
The Replication Receive page allows you to specify the source systems
the DXi4000 will receive replicated data from. You must add a source
system to the list of allowed replication sources before you configure
the source to send replicated data to the DXi4000. The DXi4000 can
receive replicated data from up to 10 sources. You can also specify the
number of received snapshots that are retained for each source.
Note: For more information about working with received snapshots,
see Receive NAS on page 97.
To access the Replication Receive page, on the Replication
Configuration page, click the Receive tab (see Figure 89 ).
Figure 89 Replication Receive
Page
Use the Replication Receive page to perform the following tasks: