Initial Configuration
21
DXi4000
Figure 16 Getting Started
Wizard: Confirm
14
Review the settings you selected to make sure they are correct. If necessary, click
Previous
to return to a previous step to make changes
15
After you have confirmed all settings, click
Finish
.
A message appears stating that completing the setup will restart the system.
16
Click
Yes
to restart the system.
17
Disconnect the computer from the DXi4000. Reset the computer network settings
back to its default values.
18
Wait for the system to fully restart. This can take up to 30 minutes.
Continue with the next section to create a typical backup configuration.
Connecting the
Ethernet Cables
Connect the Ethernet cables to the DXi4000 as follows (see
Figure
17
).
Note:
The Ethernet cables are used for remote management and NAS connectivity.
Review the DXi4000 Site Planning Guide (6-67093) located on the
documentation CD to determine the number of Ethernet cables to attach.
When connecting and disconnecting Ethernet cables or making configuration
changes, it is normal for the
Admin Alert
indicator to display on the remote
management console.
