Initial Configuration
13
DXi4000
Note:
Wait for the system to boot before continuing with the procedure. This can
take up to 30 minutes.
Figure 8 Power Buttons
Power button
The NMI button is recessed to prevent it
from being pressed accidently. Press only
when instructed by technical support
Front
2
Using an Ethernet cable, connect the Ethernet port on the computer to Ethernet
port 2 on the back of the DXi4000. Ethernet port 2 is in the far left-hand Ethernet
port in the middle PCI slot (slot 2) as you face the back of the system (see
Figure
9
).
Figure 9 Ethernet Ports
ST
1
3
2
1
2
Gb
2
Gb
1
2
3
4
5
Service port (not
for customer use)
Not used
Back
Ethernet port 2
Not used
3
Configure the network settings on the computer:
Note:
This procedure assumes you are running Windows XP on the computer. The
steps might be different if you are using another operating system.
