2
DXi4000 Configurations
DXi4000 Installation and Configuration Guide
DXi4000 Configurations
The DXi4000 is available in the following configurations (see
Table
1
):
Table 1 DXi4000
Configurations
DXi4000 Configuration
Raw Capacity
Usable Capacity
Number of Hard
Drives
Hard Drive
Capacity
Model 4510
(4 x 1GbE Ethernet ports)
4 TB
2.2 TB
8
500 GB
Model 4520
(4 x 1GbE Ethernet ports)
8 TB
4.4 TB
8
1 TB
Model 4601
(4 x 1GbE Ethernet ports)
4 TB*
8 TB*
12 TB*
3.87 TB
7.74 TB
11.61 TB
8
2 TB
* For DXi4601, raw storage capacity can be upgraded at any time after purchase in increments of 4 TB, up to a total of 12 TB.
Storage capacity upgrades are enabled simply by adding a license key and rebooting the system.To purchase a storage capacity
upgrade license, contact your Quantum sales representative. After you obtain the storage capacity license, refer to the section
“Adding a License Key” in the DXi4000 User’s Guide (6-67092) for instructions on completing the capacity upgrade.
Choosing a Location
Quantum recommends installing the DXi4000 system in a controlled or restricted area
to prevent access by untrained personnel. In addition, Quantum recommends that
system installation be performed only by qualified IT personnel.
When choosing an installation site for the DXi4000 system, consider the following
requirements:
•
Installation Requirements
on page
2
•
Rack Space Requirements
on page
3
•
Environmental Conditions
on page
3
Installation
Requirements
Review the DXi4000 Site Planning Guide (6-67093) to ensure that your site meets the
installation requirements for the DXi4000.
