Initial Configuration
15
DXi4000
Note:
If the
Login
window does not display, verify that you entered the correct IP
address (
10.1.1.1
) and that the network settings on the computer are
correct. Wait five minutes, then try again. If the
Login
window still does
not display, contact Quantum Customer Support. (Contact information is
located on the last page of this document.)
Continue with the next section to log on to the system and complete the
Getting
Started
wizard.
Figure 11 Login Window
Completing the Getting
Started Wizard
To complete the DXi4000
Getting Started
wizard:
1
On the
Login
window, select
Administrator
, type
password
for the password, and
click
Login
.
The
Welcome
page displays (see
Figure
12
).
Note:
If a message on the page indicates the DXi is in Limited Mode, wait ten
minutes, and then log on again.
