28
www.quantumrehab.com
Quantum 1402
V . C O M F O R T A D J U S T M E N T S
To adjust the anti-tip wheels:
1. Place an adjustable spanner on the inner locknut of the anti-tip
bracket located right after the shock strut. See figure 23.
2. Turn the locknut anticlockwise to loosen.
3. Place spanner on the adjustable cam located on the other side of the
locknut. See figure 24.
4. To adjust the anti-tip upward, turn the cam anticlockwise. To adjust
the anti-tip downward, turn the cam clockwise.
5. Tighten the locknut.
6. Make the same adjustment to the other anti-tip wheel.
WARNING! Consult your Quantum Rehab Specialist
before attempting to change the anti-tip height!
Changing the anti-tip wheel height affects handling
under deceleration!
WARNING! The higher you raise the anti-tip wheels,
the more tendency your power chair has to tilt
forward when coming to a stop. You can
compensate for this by making a small adjustment
to the pre-programmed deceleration setting in the
controller or by moving the seat assembly farther
to the rear of your power chair. Failure to do so may
result in personal injury.
PROHIBITED! Do not remove the anti-tip wheels.
Figure 23. Anti-Tip Bracket (Inner Locknut)
Figure 24. Anti-Tip Wheel Adjustment (Cam)
