26
www.quantumrehab.com
Quantum 1402
RELEASE LEVER A
RELEASE LEVER B
ADJUSTMENT SCREWS
Figure 22. Elevating Leg Rests
LEG REST EXTENSION
V . C O M F O R T A D J U S T M E N T S
SETSCREW
Figure 20. Foot Platform Angle Adjustment
Figure 21. Swing-Away Footrests
SFR RELEASE LEVER
ADJUSTMENT SCREWS
FOOTREST EXTENSION
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the mounting hardware from the foot platform
bracket. See figure 19.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the mounting hardware into the foot platform
bracket and tighten.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex
key. See figure 20.
To adjust the foot platform angle:
1. Locate the setscrew on the underside of the foot platform.
2. Turn the setscrew clockwise to raise the front of the
foot platform.
3. Turn the setscrew anticlockwise to lower the front of
the foot platform.
Swing-away Footrests
Your power chair may be equipped with optional Swing-
away Footrests (SFRs) that enable you to swing the foot-
rests to the side before transferring onto or off of your
power chair.
To swing the footrests:
1. Push in the SFR release lever. See figure 21.
2. Swing the footrest to the side.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of
each footrest extension. See figure 21.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 30.5–48 cm (12–19 in. ).
To rotate the ELRs:
1. Push in release lever A. See figure 22.
2. Rotate the ELRs.
