Quantum Rehab Dynamo, Руководство пользователя

Страница: 28 / 59

28 www.quantumrehab.com Quantum Dynamo
V . C O M F O R T A D J U S T M E N T S
Foot Platform Height
The foot platform height is easily adjusted to different heights in
1/2-in. increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform bracket. See
figure 23.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the hardware into the foot platform bracket and tighten.
Foot Platform Angle
You can adjust the angle of the foot platform with a hex key.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew. See
figure 24.
2. Loosen the nut and turn the setscrew counterclockwise
to raise the front of the foot platform and tighten the nut
to secure.
3. Loosen the nut and turn the setscrew clockwise to lower
the front of the foot platform and tighten the nut to secure.
Controller Position
You can position the controller for either left-hand or right-hand
use.
WARNING! Do not place the controller harness
so that it can be pinched in the seat frame or
the power base frame.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller connector(s) from the power base.
3. Cut the wire tie(s) securing the controller harness to the armrest.
4. Loosen the setscrews in the mounting block. See figure 25.
5. Slide the controller out of the armrest.
6. Loosen the mounting screws in the mounting block, move the
mounting block to the other armrest, and tighten the mounting
screws. See figure 25.
7. Place the controller in the other armrest.
8. Tighten the setscrew(s) to secure the controller.
9. Use a wire tie to secure the controller harness to the armrest.
10. Plug the controller connector(s) into the power base.
SETSCREWS
MOUNTING
SCREWS
MOUNTING
BLOCK
Figure 24. Foot Platform Angle
Figure 25. Mounting Block Controller
Installation
SET SCREW
Figure 23. Foot Platform Height Adjustment