manualshive.com logo in svg

Quantum Rehab Dynamo, Руководство пользователя

Поделиться
Скачать
Quantum Rehab Dynamo Скачать руководство пользователя страница 20

20

www.quantumrehab.com

Quantum Dynamo

Manual Freewheel Levers

The power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive
motors from the gearboxes and maneuver the chair manually.

WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage

the drive motors when the power chair is on an incline,  as the unit could roll on its own, causing

injury!

NOTE: You must turn off the power before disengaging the drive motors, otherwise you may get an error code (flashing
lights) on the controller. To clear this code, turn off the controller and place the power chair in drive mode. Then turn
on the controller. The error message should be cleared. If it isn’t, contact your Quantum Rehab Specialist.

To engage or disengage the drive motors:
1. Locate the levers on the front of the power base. See figure 8.
2. Push the manual freewheel levers so they are facing the front of the power chair to engage the drive motors (drive

mode). See figure 8.

3. Push the manual freewheel levers so they are facing the center of the power chair to disengage the drive motors

(freewheel mode). See figure 8.

If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to
the desired position.

WARNING!  It is important to remember that when your power chair is in freewheel mode, the

braking system is disengaged.

I I I .   Y O U R   P O W E R   C H A I R

Figure 8.  Manual Freewheel Levers

DRIVE MOTOR ENGAGED

DRIVE MOTOR DISENGAGED

MANUAL FREEWHEEL LEVERS

Содержание Dynamo




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды