Quantum Rehab Dynamo Скачать руководство пользователя | Manualshive

Страница: 15 / 59

background image

Quantum Dynamo

www.quantumrehab.com

15

Electromagnetic and Radio Frequency Interference (EMI/RFI)

WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can

have an adverse affect on the performance of electrically-powered mobility vehicles.

Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-way
radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links,
microwave signals, paging transmitters, and medium-range mobile transceivers used by emergency vehicles. In some
cases, these waves can cause unintended movement or damage to the control system. Every electrically-powered mobility
vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the greater the protection against EMI. This
product has been tested and has passed at an immunity level of 20 V/m.

WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio transmitters

may cause unintended movement of your electrically-powered mobility vehicle due to EMI.

Exercise caution when using any of these items while operating your mobility vehicle and avoid

coming into close proximity of radio and TV stations.

WARNING! The addition of accessories or components to the electrically-powered mobility vehicle

can increase the susceptibility of the vehicle to EMI. Do not modify your power chair in any way

not authorized by Pride.

WARNING! The electrically-powered mobility vehicle itself can disturb the performance of other

electrical devices located nearby, such as alarm systems.

NOTE: For further information on EMI/RFI, go to the Resource Center on www.pridemobility.com. If unin-
tended motion or brake release occurs, turn your power chair off as soon as it is safe to do so. Call Pride at 800-424-
8205 to report the incident.

I I . S A F E T Y

«
...
13
14
15
16
17
...
»

Содержание Dynamo




























































Отзывы:

Нет отзывов

Похожие инструкции для Dynamo

Drop Mount Hardware

Бренд: SPEX Страницы: 20

Бренд: RHYTHM Страницы: 2

Бренд: KOMFI-RIDER Страницы: 20

Бренд: promotal Страницы: 28

Бренд: HD Страницы: 2

Syst'am Polyair

Бренд: SUMED Страницы: 2

Бренд: Handicare Страницы: 36

Бренд: identités Страницы: 13

Бренд: Quickie Страницы: 84

Electric-TIM II

Бренд: Yuwell Страницы: 18

1 612 iCHAIR MC3 27

Бренд: Meyra Страницы: 12

Бренд: Otto Bock Страницы: 35

Бренд: Otto Bock Страницы: 32

Avantgarde XXL 2

Бренд: Otto Bock Страницы: 32

Avantgarde Teen2 T

Бренд: Otto Bock Страницы: 32

Бренд: Merits Health Products Страницы: 34

Бренд: Merits Health Products Страницы: 38

Бренд: Van Os Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды