Quantum Rehab Dynamo страница 47 Скачать руководство пользователя | Manualshive

Страница: 47 / 59

background image

Quantum Dynamo

www.quantumrehab.com

47

Drive Profile Selection

Your Microdrive controller may be programmed for more than one drive profile that allows the system to be custom
tailored to your environment.

To select a profile setting:
1. Use the on/off switch to power on the chair and the controller.
2. Press the mode button.
3. Move the joystick left or right to select the desired drive profile. Each of the LEDs indicate a separate profile.

NOTE: The system can be programmed with 5 different profiles.

V I I . O P E R A T I O N

NOTE: When a toggle switch is set to “J/S,” the joystick has
control of a particular function. When the toggle switch is set
to “Local,” control of this function is disabled at the joystick.

External Switch Jacks
The external switch jacks are used for an external control (e.g. buddy
button, single switch, etc.). There are two external jacks on the joy-
stick interface module: mode and power. The switches can work in
conjunction with or in replacement of switches on the joystick.

Horn Toggle
The horn toggle disables the horn key on the controller.

Speed Toggle
The speed toggle disables the spead adjustment dial on the controller.

Mode Toggle
The mode toggle disables the mode switch on the controller.

Power Toggle
The power toggle disables the on/off switch on the controller.

Redel Connector Port
The redel connector port is used for the power module interface.

Off-board Charger/Programming Socket
The off-board charger/programming socket is used for off-board charger connection and controller programming. If you
use an off-board charger, the charger current should not exceed 8 amps. Contact your Quantum Rehab Specialist for more
information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/

programming socket. See your Quantum Rehab Specialist for more information. Failure to heed

can result in personal injury and/or product damage.

Figure 34. Joystick Interface Module Components

«
...
45
46
47
48
49
...
»

Содержание Dynamo




























































Отзывы:

Нет отзывов

Похожие инструкции для Dynamo

Бренд: Zippie Страницы: 60

Бренд: AAT Страницы: 44

Бренд: RTS Страницы: 19

Бренд: Greencare Страницы: 29

Бренд: Vela Страницы: 20

Attendant Propelled

Бренд: HENRY Страницы: 18

Airrex LT Self-propelled

Бренд: CareCo Страницы: 24

Бренд: B+B Страницы: 85

Бренд: B+B Страницы: 87

Бренд: Royale Страницы: 3

Jazzy 610 Series

Бренд: Pride Страницы: 47

Бренд: Medifab Страницы: 68

Бренд: Vermeiren Страницы: 3

Бренд: Vermeiren Страницы: 16

Бренд: Vermeiren Страницы: 16

Compact-easy LCEV

Бренд: Levo Страницы: 38

Бренд: Karma Страницы: 68

Бренд: Quickie Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды