QUANTA STRATOS S210 Series S210-X12MS, Техническое руководство

Страница: 50 / 223

I
NSTALLING
H
ARDWARE
M
EMORY
M
ODULES
2-13
2.6 Memory Modules
General Guidelines
All servers have specific rules for the population of memory on
the individual mainboards that must be obeyed. Refer to the fol-
lowing individual server rules for information on how to populate
the particular server required.
Removing Memory Modules
Prerequisite: Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Press down on the two memory module slot levers  .
The memory module partially ejects.
Figure 2-18. Removing Memory Modules
2. Lift out the memory module

WARNING!
S210-X12MS mainboards are supplied with all DIMM slots
populated with memory 9 dummies for proper air flow. When
installing and replacing memory modules, only remove those
dummies that are to be directly replaced. All S210-X12MS
DIMM slots must be occupied at all times by either a memory
module or dummy cover.
WARNING!
Memory modules remain hot after the system is powered
down. Allow sufficient time for the memory modules to cool
before handling system components.
!
!
WARNING!
Handle the memory module by the edges at all times.
1
2
!