QUAMAR Q50, Руководство пользователя, Страница: 45 / 132

45
After setting parameter of time press again key “OK” to confirm and exit. To exit from
programme menu press “ESC”.
WEAR GRINDERS - Provides information on the total doses that can be erogated before
the replacement of the grinders. This item is editable. press for 3 seconds key “ MENU ” to
get access to programme menu. press the key “ + ” or “ - ” to slide the menu options, select
“ WEAR GRINDERS ” pressing key “ OK ”.
Using key “ + ” or “ - ” it’s possible to increase or decrease the dosis. press key “ OK ” to
confirm and exit. To exit from programme menu press “ ESC ”.
Upon reaching the maximum doses that can be erogated with the set of grinders in use, the
display will show the written “
WEAR GRINDERS ”. When replacing the grinders, enter the
general programming menu and access “ DISPENSED DOSES TOTAL COUNT ”. Press key
“ RESET ” to carry back the number as the value of “ WEAR GRINDERS ”. After doing it, the
written “ WEAR GRINDERS ” will disappear from the display. To exit from programme menu
press “ ESC ”.
SET WRITTEN “READY” - Keep touched for 3 seconds key “ MENU ” to get access
to programme menu. press the key “ + ” or “ - ” to slide the menu options, select “ BAR
message ”. Select it pressing key “ OK ”, then using key “ MAN ” move the cursor till the point
you want the written begins. Use key “ + ” and “ - ” to slide the alphanumeric list; to stop
at choosen character and move to next, use key “ MAN ”. Repeat the procedure till the
choosen code for stand by mode is complete. To confirm and exit press “ OK ”. To exit from
programme menu press “ ESC ”.
BRIGHTNESS - To set the display brightness. press for 3 seconds key “ MENU ” to get access
to programme menu. Press the key “ + ” or “ - ” to slide the menu options, select “ brightness ”
pressing key “ OK ”, then using “ + ” or “ - ” it’s possible to increase or decrease the brightness
from 0 to100%. To confirm and exit press “ OK ”. To exit from programme menu press
“ ESC ”.
TOTAL COUNT OF EROGATED DOSES - Provides information on the total doses
erogated by the grinder and the remanent doses until the next grinding blades change. To
display it, press for 3 seconds key “
MENU ” to get access to programme menu.
DISPLAY PROGRAMMING