49
Customer Helpline
0151 649 1500
Step 7 - Reversing the Guide Bar
Step 8 - Adjusting the Automatic Chain Lubricator
Maintenance
7a. Remove the Guide Bar
The guide bar must be completely removed from the chainsaw. To do this, reverse the procedures
described in the assembly manual.
7b
7b. Clean the Guide Bar
NOTE!
To clean the guide bar, you will need a bar scraper. This is not supplied with the chainsaw and
must be sourced from a suitable supplier.
Using a bar scraper
, remove any trapped debris from the grooves at the top and bottom of the
guide bar
.
If necessary remove any burrs or sharp edges using a flat file.
7c. Reverse the Guide Bar
Refit the guide bar
to the chainsaw as described in the assembly manual. Take care to ensure that
the guide bar is inverted before reassembling.
The automatic chain lubricator is factory set to the ideal setting for the chainsaw to operate efficiently.
If the automatic chain lubricator requires adjustment after extensive use, contact a suitably qualified
service technician to inspect the chainsaw and make the necessary adjustments.
