30
Customer Helpline
0151 649 1500
Felling (continued)
How to Use the Chainsaw
NOTE!
The chainsaw is designed for occasional use by home owners, garden owners and campers
and is for general work such as stump grubbing, cutting firewood, etc. It is not designed for lengthy
use. If it is used for a lengthy period, the vibrations it causes in the hands of the user may result in
circulation problems (white finger syndrome).
WARNING!
Felling of trees is prohibited without the necessary training.
WARNING!
Ensure that you frequently check the operation of the chainsaw Brake.
NOTE!
Spiked bumper.
WARNING!
Do not cut down a tree during high or changing winds or if there is a danger
to property. Consult a tree professional. Do not cut down a tree if there is danger of
striking utility wires; notify the utility company before making any cuts.
WARNING!
Never walk in front of a tree that has been notched. Make the felling cut (D) from
the other side of the tree and 1.5-2.0 inches (3-5cm) above the edge of the notch (C). Never
saw completely through the trunk. Always leave a hinge. The hinge guides the tree. If the trunk
is completely cut through, control over the felling direction is lost.
Insert a wedge or felling lever in the cut well before the tree becomes unstable and starts to move.
This will prevent the guidebar from binding in the felling cut if you have misjudged the falling direction.
Make sure no bystanders have entered the range of the falling tree before you push it over.
WARNING!
Before making the final cut, always recheck the area for bystanders,
animals or obstacles.
