Quail Digital Pro10, Руководство по установке

Страница: 9 / 12

page 9
Note:
1. If you present a headset but the registration point doesn’t start to fast-flash GREEN it means that
the headset is already registered to that system, so no further action needed on that headset.
2. If the registration point LED fast-flashes GREEN and then turns solid RED, it means that there’s a
problem initialising the headset, put it aside and try again. If it continues, see headset fault guide.
3. If the registration point LED flashes AMBER>RED it means that the headset is programmed to a
different set of global frequencies and will need to be returned to your service provider.
Step 11 - Testing the installation
Once all headsets have been registered onto the system conduct a final full range test using 2
people with headsets. You should walk slowly through all areas on all floors to confirm uninterrupted
communication with the other headset wearer.
As you move round the store, go to each base station. Look up. When you push the page button on
the headset the status LED on the base station you’re standing close to will flash. This signifies that it
has picked up your headset signal, and therefore is working properly. Carry out the same check with
each base. More detail on headset functionality and troubleshooting are detailed in Appendix B.